Loading...

← Beatlemania Variations List

Beatlemania!
With The Beatles

This album was a unique Canadian release

LP.6051.7.4
Orange 2nd generation (Dynaflex), ® logo, T-6051 matrix
1975

This variation was released on the second generation orange label in 1975. It is identical to LP.6051.7.3 in every way (black perimeter print, ® logo, small 24 mm Dynaflex pressing ring, same cover) except for its matrix numbers: the EMI "XEX" numbers are gone, replaced by the hand-written catalogue number T-6051, followed by a letter for each side.

Beatlemania! With The Beatles, LP.6051.7.4

Availability

This variation was available in 1975, most likely for a few months only. Along with LP.6051.7.3, it is one of the last two mono pressings of Beatlemania! before the album was made only in stereo later that year (see LP.6051.7.5). Which of the two batches came first is not documented; the order used here is a best guess based on the matrix numbers.


General Information

Second generation orange labels can be identified by the black perimeter print around the label, making it much easier to read than first generation labels with gold text. This pressing was made in small quantities when demand required a new run of pressings to restock the warehouse. Another interesting fact is that this label generation was unique to Canada since Capitol USA opted for the Apple label for their Capitol reissues instead.

Dynaflex pressings are recognizable by their flexible vinyl and small pressing ring similar to Compo pressings (24 mm vs. 25 mm). RCA was experimenting with new vinyl compound, looking to improve durability and lower costs. They used a flexible compound for their new Dynaflex pressings. While Capitol pressings were not identified as "Dynaflex" on the labels like RCA records, the RCA pressing plant did use the new compound on Capitol albums. These "Dynaflex pressings" are therefore really thin, and wobble back and forth when shaken. Pressing rings may look like Compo / Decca pressings, but matrix numbers show they are in fact RCA pressings.


Pressing Information

As was the case for all previous variations, Capitol of Canada once again had the RCA pressing plant in Smiths Falls (Ontario) manufacture this batch, on the same flexible Dynaflex compound as LP.6051.7.3. What changed is the lacquer. Every mono pressing until then carried the EMI matrix numbers XEX-447 and XEX-448 (the "dash 4" on LP.6051.7.4), but this batch was made from a new set of lacquers identified only by the album's catalogue number, hand-written, with an A or a B for the side:

Side 1: T-6051-A
Side 2: T-6051-B

Beatlemania! With The Beatles, LP.6051.7.4, matrix stamp detail

Read together, these markings tell how the record was made: lacquers cut in Canada from EMI's UK tapes, then pressed by RCA in Smiths Falls.


The run-out names no mastering facility, so where these lacquers were cut is not known yet (a hand-written number only tells us it was done in Canada). Hemmingsen notes that some orange label pressings of the mid 1970s were made from Capitol of Canada lacquers (source: P. Hemmingsen, The Beatles’ Canadian Discography part. 2), which could be the case here, but nothing on this copy confirms it. The sound itself is still the mono mix from EMI's UK tapes.

A new set of lacquers suggests the "dash 4" plates used since the early 1970s had finally worn out, and that demand (low as it was) still called for one more mono run before the stereo version took over.


Cover

The cover of this variation is similar in design to previous variations, and was also manufactured by Modern Graphics. These covers seem to have a slightly shorter inner seam construction (8 mm)

Beatlemania! With The Beatles, LP.6051.7.4 Beatlemania! With The Beatles, LP.6051.7.4

Covers still featured the words PRINTED IN CANADA inside a box at the bottom of the back cover, alongside the monophonic playing instructions.

Covers transitioned to a new construction type around this period. Some copies are still found with older front slick construction, but most copies have been confirmed with a new "wraparound" construction (where front and back slicks are not separate, but one large slick folded over the spine of the jacket, like a book).

Beatlemania! With The Beatles, LP.6051.7.4

The wraparound construction was introduced by Modern Album (the company that assembled Capitol's jackets) to compete with Shorewood's posterboard covers. The slicks themselves were printed by Modern Graphics (see the Printers page for details).


Packaging

This edition was shipped in tight shrink wrap, with or without a plain paper LP inner sleeve. These Capitol sleeves are square and have a slight curve at the top.

Beatlemania! With The Beatles, LP.6051.7.4