Loading...

← A Hard Day's Night Variations List

A Hard Day's Night
(US Format)

8T.3006.UA1.2
United Artists, Black Shell with 2 Separate Slicks
Circa 1970

8T.3006.UA1.2 seems to be a transitional tape. It keeps the two separate slicks (front and back) of the first issue (8T.3006.UA1.1), with the 1960s United Artists logo on the front, but on the newer black shell with a metal rivet on the back, the same shell type as the later single-slick tapes (see 8T.3006.UA2.1 and 8T.3006.UA2.2).

A Hard Day's Night (US Format), 8T.3006.UA1.2, front A Hard Day's Night (US Format), 8T.3006.UA1.2, back

Availability

This variation clearly came after 8T.3006.UA1.1, as it uses the newer rivet shell, most likely around 1970. On one side, the two-slick artwork would place it before the white single-slick tape (8T.3006.UA2.1), but white shells are usually the earlier ones (late 1960s, early 1970s), so the order is hard to figure out. It would have been short-lived, and it is scarce today.


General Information

As with 8T.3006.UA1.1, this tape was prepared by Compo for United Artists, as A Hard Day's Night was not a Capitol title in Canada at the time. Hemmingsen documents a white shell with a slick on each side (1968) and, sometime after 1970, a black shell with the newer block UA logo and no slick on the back (source: P. Hemmingsen, The Beatles’ Canadian Discography part. 3). This copy sits between the two: the shell is the later one, while the artwork is still the first.


Pressing Information

The tape was duplicated by Compo in Cornwall (Ontario). The slicks are the same as on 8T.3006.UA1.1: a front slick with the original album artwork (stereo banner and 1960s United Artists logo), and a back slick listing the four programs, with the "Sonic Spectrum +" text and "The Compo Company Limited / Printed in Canada" at the bottom. A third label on the bottom edge gives the title, the "8" logo with U3006, and the United Artists Stereo Tape logo.

The shell itself is what sets this variation apart. Unlike the white Datapack-type shell of 8T.3006.UA1.1, it is the black cartridge with the metal rivet in the middle of the back and the triangular cut-out above the slick, the shell found on 8T.3006.UA2.1 and 8T.3006.UA2.2.

A Hard Day's Night (US Format), 8T.3006.UA1.2, side A Hard Day's Night (US Format), 8T.3006.UA1.2, bottom edge label

Cover and packaging

There is no known cardboard cover or slip case prepared for this tape. United Artists probably used a generic cardboard slip case instead, but this needs to be confirmed.